Autolift grinding welding helmet

  • Autolift grinding shield
  • 7mm long wide view LCD window
  • Dual equipped with 2 photo sensors and RF sensors
  • Fast RF shading speed and stable TIG welding performance
Color red blue


  • Auto-lift Grinding Shield

    An Autodarkening simple one-touch sliding faucet provides a wide, clear protection shield for grinding after welding.

  • Equipped with a High-speed Dual RF Sensor

    It has a fast advance shielding speed and protects malfunctions of a photo sensor during welding at low-current TIG welding. It can also weld stably for work such as mirror welding where a photo sensor is blocked by a structure.

  • Natural Color Wide-View Window
    (European Standard Optics Grade 1)

    A clearer, brighter, natural-color LCD protects the eyes more comfortably, and a 7mm-longer LCD screen provides a wide view to the right and left.

NEW Headband

  • Smooth ratchet or precise tightening.
  • Dual-back cushioning pads to fit personal head sizes and comfort setting.
  • Swiveling, self-adjusting, turnable back strap accommodate a cap worn backwards
  • Two adjustable crown straps for better stability.
  • Easy lock lever, Sliding pivot to adjust the shields distance to face.
  • Slip-resistant knob for adjusting the helmet's pivot action with glove hands, The smooth up and down pivot action can be locked in the up position
  • Non-slip cell pads contour to your forehead

Filter Cartridge

  • Solar cell POWER AUTO ON/OFF Battery power consumption is minimized by supplying power from the solar cell of welding arc, which allows extended use of battery. Its auto power ON/OFF function through solar cell provides enhanced usability
  • ARC Light Detection Photo Sensor
  • Auto-darkening welding filter The welding filter of the hightest optical class (1/1/1/1) safely blocks harmful rays (UV,IR) of the welding arc and protects the welder's eyes comfortably and safely with a fast shading speed of 1/25,000 seconds.
  • RF Sensor Switch

    New RF high/Low switch even better RF sensitivity control Switch to high fot extremely low amp TIG (down to 1 amp) or when using shielded cablesand welders. Switch to low when working near other welder or in areas of high RF intererence to avoid flase trigger and fot general welding

  • Sensitivity Control

    Ensures top welding performance by optimizing sensor sensitivity through four sensors installed according to carious types of welidng environment and it makes welding easy by preventing light intererence from surrounding welding work or lights

  • Shade Control

    Shade level can be adjusted in 5 level from #9 to #13 according to welding type and current (welding ARC)

  • Delay Control

    Allows welders to maintain comfortable vision by preventiong eye fatigue from remaining heat after thick plate welding and maintaining shade during fast tack welding by delaying the brightening speed

  • Low Battery Warning


Optical Class 1/1/1/1
Switching Speed 1 / 25,000 s (0.04ms)
Shade Control Inactivated SHADE #3
Activated(Dark) SHADE #9 ~ #13
Delay Control 0.05s ~ 0.8s (Fast-Slow)
Sensitivity Control LOW - HIGH
Dual Sens Photo Sensor 2
RF Seonsor* O
TIG Performance* Low Amp. < 5A
Mode Switch* RF-Photo (2step)
Grind mode Autolift Grind shield
Power Source 3V Lithium(CR2032) 2EA + Solar cell (Auto On/Off)
Battery life 3000h (Replaceable)
ADF Size 125X82X13mm
ADF Viewing area 111X42mm ( 97X46mm before)
ADF Weight 111g
Product Total Weight 600g
Operating Temp. - 5℃ ~ +55℃
Storage Temp. -20℃ ~ +70℃

Parts Diagram

  • Helmet Facet
  • Inside Protective Lens
  • Magnifier (108X51mm)(sold separately)
  • Slider Folder
  • External Control
  • Wire Holder
  • Rear Side Protective Lens (118.4X46mm)
  • Autodarkening Shielding Cartridge
  • Battery (CR2032)
  • Front Side Protective Lens (117X95mm)
  • Front Cover
  • Push Button Set
  • Hinge Cap Set LR
  • Headband Set